How to Replace a Saab 9-3 Key
The Saab 9-3 is a fantastic car that is full of appeal for drivers. saab key programming offers good visibility and an impressive performance engine. It also has a top safety rating.
It is nevertheless important to make sure that you have at minimum two keys that work for your car. If you lose just one key, it could be costly to purchase the new one.
How to Replace the Ignition Key on a Saab 9-3
You'll must change your car key in the event that it isn't turning. This guide will guide you through how to do it on the Saab 9-3. You'll need to replace the key, get another reprogrammable device, and buy a brand new case for your key-fob.
In contrast to older models, the majority of modern Saab automobiles use a transponder on the key-fob instead of a physical key made of metal to unlock and start the vehicle. The issue with this is that the reprogrammable battery inside the key-fob will eventually wear out and lose charge for any longer. This is particularly applicable if you are using the same key for the lock you have.
The good part is that the battery can be replaced quite easily by a professional locksmith. If you've got the right tools and patience, you can do it yourself. The first step is taking the key-fob from its case. Insert a flathead into the slot in the middle of your case. You must work slowly, as the plastic is thin and easily damaged.
When the case is opened and you are able to prepare the new key by combining the lower part of the key that was used previously with the banana and transponder on the new key. This will ensure that the new key is linked to the CIM properly, which could make a huge difference when replacing the original key for your Saab 9-3.
How to replace the ignition Key on a Saab 900
If you don't have two keys you'll need to remove the steering wheel and dashboard for access to the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you can take off the trim and dashboard pieces around the steering wheel. Once the dash is removed, you can insert a screwdriver into the opening on the back of the ignition switch and pull it out.
The ignition cylinder is equipped with the key lock, which can prevent the vehicle from starting if key isn't in it. If the ignition switch on your 900 isn't working, look at the key to determine whether it's inside the lock or stuck in the ignition barrel. It's also an excellent idea to rotate your keys often and keep them clean so that they don't get bent.
Saab cars differ from other cars in the sense that they don't have traditional keys made of metal. Instead, the car is able to recognize the electronic signals from the key fob through a special chip in it.
If you lose just one working key fob your dealer will charge an additional fee to replace your computer module (also called the CIM). We can reprogram the EEPROM on your existing computer and allow it to accept new keys, without the need for replacement. You will save over 50% on the dealer's price! This is the SAAB Key PROGRAM. Learn more about it here!
How to replace the ignition Key on a Saab 9-5
The metal part of classic Saab keys is easy to copy and does not pose a serious threat to vehicle theft. The electronic portion of the key-fob is equipped with a chip that recognizes the car when the key is inserted into the ignition switch.
Saab has relied on the technology of this anti-theft system for over a decade. It's not quite as effective as a physical door lock however, it makes the theft of your car more difficult. Every Saab owner needs to keep a spare Saab key in their car.
Most new Saabs come with two keys at the factory, however you can buy more keys from a dealer through a special handheld computer referred to as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is NG 9-3 cars, which have modern, more advanced features that require a separate key-fob, and work through a different process.
If you lose all keys in the event of a loss, the dealer will replace your CIM or TWICE modules and bill you a premium for it. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.
How to replace the ignition Key in the Saab XC90
It could be time to replace your SAAB key fob if you're having trouble turning the barrel of the lock. It's rather simple and doesn't need you to visit an agent. Instead you can do it yourself at home by using the help of a few tools.
First, you'll need to prepare the new keys. Before you start, be sure that the anti-theft feature is disabled by placing blocks on the rear wheels, and then adjusting the handbrake. Insert the key into the ignition and turn it to the "on" position. This will activate the accessories but it will not start the engine. Repeat this process 5 times, and then leave the key in the "on" position.
You'll need to purchase a new case for your key fob. They can be found at a variety of auto parts stores and are generally inexpensive. You can purchase them with or without electronics, depending on the model.
To open the case to open the case, gently push the flathead screwdriver into the slot in the middle. The case should split easily, and when you have it, you'll be able to gain access to the internal electronics. Use a flathead screwdriver to gently pull out the electronics.